Skip to content
Phone: +49 (0) 4101 805 0028
VISIONTECHNIK
FLDR-Si120B-RGB

Falcon

Gewinkelte Ringbeleuchtung FLDR-Si120B-RGB

Manufacturer part number: FLDR-Si120B-RGB

Series: FLDR-120B

Lens opening / inner diameter
Ø 63.5 mm
Outer diameter
Ø 128 mm
Light color
RGB
Ring design / angle of incidence
Full ring, Angled front light
Operating mode / controller required
Continuous and strobe, Controller recommended
Recommended working distance
20 – 100 mm
Connection
(JST SMR-03V) x3
Supply voltage / power consumption
24 V, 23.04 W

Price and availability on request

Request this item directly by email

Not sure which model fits?

One of our staff will review your application and recommend the right configuration.

Have your application reviewed

Technical data

Manufacturer part numberFLDR-Si120B-RGB
TypeRing light
VersionAngled
ColorRGB
SizeØ 128 × 29 mm
Illumination SurfaceØ 112 mm
Illumination Inside Dimension63.5 mm
FOVØ 63.5 mm
Working Distance20 – 100 mm
Operating Voltage24 V
Power Consumption23.04 W
Current0.96 A
Ripple Voltage≤ Vs ± 5 %
Reverse Battery ProtectionYes
Total Number of LED296
LED PackageSMD-LEDs separate colours
LED Life Span Continous20000 hours
LED Life Span Strobeapprox. > 50,000 hours (to 50 % remaining intensity at 25 °C ambient temperature)
Eye safetyExempt group
HousingAluminum
Weightapprox. 400 g
Connector(JST SMR-03V) x3
Connector PinPin 1: +; Pin 2: not connected.; Pin 3: -
Cable300 mm
Operating Condition0–35 °C, 20–85 % relative humidity
Operating Temperatureafter 60 minutes approx. 55 °C
Cooling MethodMounting on a machine part for heat dissipation
Ring designFull ring
Operating modeContinuous and strobe
Controller requiredRecommended

Data according to the manufacturer's documentation. The current manufacturer datasheet, quotation and order confirmation are authoritative. Errors and changes excepted.

Dimensional drawing

FLDR-Si120B-RGB Zeichnung

Documents

Description

FLDR-Si120B-RGB belongs to the FLDR-120B series by Falcon Illumination. The light emits RGB light. The manufacturer states a working distance of 20 - 100 mm. The emitting surface measures Ø 112 mm. The outer dimensions are Ø 128 × 29 mm.

In an angled ring light the LEDs are tilted inward. The light reaches the part at a shallower angle and converges at a defined distance below the light. Raised features, embossing and scratches therefore cast short shadows and stand out from the background without the surface as a whole becoming too bright.

The light runs on 24 V and draws 23.04 W, 296 LEDs of package type SMD-LEDs separate colours are fitted, the connection is (JST SMR-03V) x3 with 300 mm cable and the housing is aluminum.

The angle sets the working distance at which the illumination is most even. Working noticeably closer or farther away moves the bright ring away from the center of the image. The data sheet and the dimensional drawing are in the download area. We are glad to advise you on matching light, lens and light controller. Just ask for price and delivery time.