Skip to content
Phone: +49 (0) 4101 805 0028
VISIONTECHNIK
FHDR-Si75B-UV24-365

Falcon

Gewinkelte Ringbeleuchtung FHDR-Si75B-UV24-365

Manufacturer part number: FHDR-Si75B-UV24-365

Series: FHDR-75B

Lens opening / inner diameter
Ø 45 mm
Outer diameter
Ø 75 mm
Light color
UV, 365 nm
Ring design / angle of incidence
Full ring, Angled front light
Operating mode / controller required
Strobe, Controller recommended
Recommended working distance
50 – 100 mm
Connection
JST SMR-03V
Supply voltage / power consumption
24 V, 25.2 W

Price and availability on request

Request this item directly by email

Not sure which model fits?

One of our staff will review your application and recommend the right configuration.

Have your application reviewed

Technical data

Manufacturer part numberFHDR-Si75B-UV24-365
TypeRing light
VersionAngled
ColorUV
Wavelength365 nm
SizeØ 75 × 20 mm
Illumination SurfaceØ 69 mm
Illumination Inside Dimension45 mm
FOVØ 45 mm
Working Distance50 – 100 mm
Operating Voltage24 V
Power Consumption25.20 W
Current1.05 A
Ripple Voltage≤ Vs ± 5 %
Reverse Battery ProtectionYes
Total Number of LED21
LED PackageSMD
LED Life Span Continous5000 hours
LED Life Span Strobeapprox. > 10,000 hours (to 50 % remaining intensity at 25 °C ambient temperature)
Eye safetyRisk group 3 (high risk) - looking into the light while it is switched on can damage the eye
HousingAluminum
Weightapprox. 100 g
ConnectorJST SMR-03V
Connector PinPin 1: +; Pin 2: not connected; Pin 3: -
Cable540 mm
Operating Condition0–35 °C, 20–85 % relative humidity
Operating Temperatureafter 60 minutes approx. 60 °C
Cooling MethodMounting on a machine part for heat dissipation
Ring designFull ring
Operating modeStrobe
Controller requiredRecommended

Data according to the manufacturer's documentation. The current manufacturer datasheet, quotation and order confirmation are authoritative. Errors and changes excepted.

Dimensional drawing

FHDR-Si75B-UV24-365 Zeichnung

Documents

Description

FHDR-Si75B-UV24-365 belongs to the FHDR-75B series by Falcon Illumination. The light emits UV light (365 nm). The manufacturer states a working distance of 50 - 100 mm. The emitting surface measures Ø 69 mm. The outer dimensions are Ø 75 × 20 mm.

In an angled ring light the LEDs are tilted inward. The light reaches the part at a shallower angle and converges at a defined distance below the light. Raised features, embossing and scratches therefore cast short shadows and stand out from the background without the surface as a whole becoming too bright.

The light runs on 24 V and draws 25.20 W, 21 LEDs of package type SMD are fitted, the connection is JST SMR-03V with 540 mm cable and the housing is aluminum.

The angle sets the working distance at which the illumination is most even. Working noticeably closer or farther away moves the bright ring away from the center of the image. The data sheet and the dimensional drawing are in the download area. We are glad to advise you on matching light, lens and light controller. Just ask for price and delivery time.