Skip to content
Phone: +49 (0) 4101 805 0028
VISIONTECHNIK
FLDR-i90B-IP67-W

Falcon

Ring light FLDR-i90B-IP67-W

Manufacturer part number: FLDR-i90B-IP67-W

Series: FLDR-90B

Lens opening / inner diameter
Ø 46 mm
Outer diameter
Ø 94 mm
Light color
White
Ring design / angle of incidence
Full ring, Angled front light
Operating mode / controller required
Continuous and strobe, Controller recommended
Recommended working distance
50 – 100 mm
Connection
M8
Supply voltage / power consumption
24 V, 13.44 W

Price and availability on request

Request this item directly by email

Not sure which model fits?

One of our staff will review your application and recommend the right configuration.

Have your application reviewed

Technical data

Manufacturer part numberFLDR-i90B-IP67-W
TypeRing light
VersionAngled
ColorWhite
SizeØ 94 × 24.60 mm
Illumination SurfaceØ 83 mm
Illumination Inside Dimension46 mm
FOVØ 46 mm
Working Distance50 – 100 mm
Operating Voltage24 V
Power Consumption13.44 W
Current0.56 A
Ripple Voltage≤ Vs ± 5 %
Reverse Battery ProtectionYes
Total Number of LED196
LED PackageSMD
LED Life Span Continous20000 hours
LED Life Span Strobeapprox. > 50,000 hours (to 50 % remaining intensity at 25 °C ambient temperature)
Eye safetyExempt group
Ingress ProtectionIP 67
HousingAluminum
Weightapprox. 271 g
ConnectorM8
Connector PinPin 1: +; Pin 2: not connected; Pin 3: -; Pin 4: not connected
Operating Condition0–35 °C, 20–85 % relative humidity
Operating Temperatureafter 60 minutes approx. 54 °C
Cooling MethodMounting on a large machine part for heat dissipation
Ring designFull ring
Operating modeContinuous and strobe
Controller requiredRecommended

Data according to the manufacturer's documentation. The current manufacturer datasheet, quotation and order confirmation are authoritative. Errors and changes excepted.

Dimensional drawing

FLDR-i90B-IP67-W Zeichnung

Documents

Description

FLDR-i90B-IP67-W belongs to the FLDR-90B series by Falcon Illumination. The light emits white light (626 nm). The manufacturer states a working distance of 50 - 100 mm. The emitting surface measures Ø 83 mm. The outer dimensions are Ø 94 × 24.60 mm.

In an angled ring light the LEDs are tilted inward. The light reaches the part at a shallower angle and converges at a defined distance below the light. Raised features, embossing and scratches therefore cast short shadows and stand out from the background without the surface as a whole becoming too bright.

The light runs on 24 V and draws 13.44 W, 196 LEDs of package type SMD are fitted, the connection is M8, the housing is aluminum and the ingress predection is IP 67.

The angle sets the working distance at which the illumination is most even. Working noticeably closer or farther away moves the bright ring away from the center of the image. The data sheet and the dimensional drawing are in the download area. We are glad to advise you on matching light, lens and light controller. Just ask for price and delivery time.