Falcon
Front lightbeleuchtung FLKR-Si87-4-W
Manufacturer part number: FLKR-Si87-4-W
Series: FLKR-87
- Lighting type
- Area front light
- Emitting area
- Ø 57 mm
- Camera aperture
- Ø 20 mm
- Light color
- White
- Beam characteristic
- Diffuse
- Drive / supply
- 24 V
- Connection
- JST SMR-03V
Price and availability on request
Request this item directly by email
Not sure which model fits?
One of our staff will review your application and recommend the right configuration.
Have your application reviewedTechnical data
| Manufacturer part number | FLKR-Si87-4-W |
|---|---|
| Type | Front light |
| Version | Angled |
| Color | White |
| Size | Ø 87 × Ø 20 × 18 mm |
| Illumination Surface | Ø 57 mm |
| Illumination Inside Dimension | 20 mm |
| FOV | Ø 20 mm |
| Working Distance | 50 – 200 mm |
| Operating Voltage | 24 V |
| Power Consumption | 3.84 W |
| Current | 0.16 A |
| Ripple Voltage | ≤ Vs ± 5 % |
| Reverse Battery Protection | Yes |
| Total Number of LED | 56 |
| LED Package | SMD |
| LED Life Span Continous | 20000 hours |
| LED Life Span Strobe | approx. > 50,000 hours (to 50 % remaining intensity at 25 °C ambient temperature) |
| Eye safety | Exempt group |
| Ingress Protection | IP 40 |
| Housing | Aluminum |
| Weight | approx. 216 g |
| Connector | JST SMR-03V |
| Connector Pin | Pin 1: +; Pin 2: not connected; Pin 3: - |
| Cable | 450 mm |
| Operating Condition | 0–35 °C, 20–85 % relative humidity |
| Operating Temperature | Lighting casing temperature, operating after 60 min. 40 °C |
| Cooling Method | Mounting on a large machine part for heat dissipation |
| Beam characteristic | Diffuse |
Data according to the manufacturer's documentation. The current manufacturer datasheet, quotation and order confirmation are authoritative. Errors and changes excepted.
Dimensional drawing
Documents
- Download datasheet
Datasheet FLKR-Si87-4-W
Datasheet · EN · 285 KB
Description
FLKR-Si87-4-W belongs to the series FLKR-87 by Falcon Illumination. The light emits white light (626 nm). The manufacturer specifies the working distance as 50 - 200 mm. The emitting surface measures Ø 57 mm. The outer dimensions are Ø 87 × Ø 20 × 18 mm.
The angled front light illuminates the inspection surface obliquely from the side. It retains more directionality than a diffuse area and thus produces a visible brightness gradient across structures - good for surfaces whose texture is to be assessed and for markings with low color contrast.
The light runs on 24 V and draws 3.84 W, 56 LEDs of package type SMD are fitted, the connection is JST SMR-03V with 450 mm cable, the housing is aluminum and the ingress predection is IP 40.
On highly reflective parts the emitting surface may appear in the image; a flatter angle or a polarizing film then helps. The data sheet and the dimensional drawing are in the download area. We are glad to advise you on matching light, lens and light controller - just ask for price and delivery time.